Post-construction clean
Drywall dust does not come out in one pass. We work top down in stages, let the air settle, then go back over the same surfaces a second time.
- Checklist
- 27 items
- Rooms covered
- 6
- Quoted as
- A fixed price for the job
Construction dust is not ordinary dirt. It is ground gypsum and sawdust, light enough to hang in the air for hours, and it is sitting on the top edge of every door frame whether you can see it or not. Sweep once and the room looks finished. Come back in the morning and there is a new film on every flat surface, because everything you disturbed has landed.
So we do it in passes. First a dry pass from the ceiling down, on vacuums with sealed HEPA filtration rather than brooms, so the dust leaves the room instead of moving around it. Then we stop. Then we wet-wipe the same surfaces in the same order, once what we lifted has had time to fall.
We do not book this job until the trades have finished and the debris is gone. If the painter is still coming back for a second coat, we schedule you after them, because cleaning ahead of the last trade is money you spend twice.
Room by room
27 items, written down
Open a room to see exactly what is done in it. This is the list your cleaner works to, not a summary of one.
- Ceilings, corners and light coves vacuumed of dust and cobweb
- Every door frame, casing and top edge cleared
- Heating registers and cold-air returns vacuumed out
- Window frames, tracks and sills dry-vacuumed before anything wet
- Floors vacuumed on HEPA, edges and expansion gaps included
- New cabinets inside and out, shelves and drawer runners included
- Manufacturer film and adhesive lifted from appliance faces
- Counters, backsplash and grout haze cleared
- Sink, tap and drain flushed of grit
- Under and behind the fridge and range before they are pushed back
- Grout haze and plaster spots off tile
- Tub, base and shower glass de-dusted, then washed
- Vanity interiors and mirror edges
- Extractor fan cover removed and washed
- Silicone lines wiped free of sanding residue
- Interior glass washed after the dust pass, not before
- Paint flecks lifted from glass where the glazing allows
- Light fixtures, shades and ceiling fan blades
- Switch plates, outlets and thermostat faces
- Second HEPA vacuum once the surfaces are done
- Hard floors damp-mopped, water changed room by room
- New carpet vacuumed both directions to lift crushed pile
- Stair treads, risers and nosings by hand
- Concrete swept and washed of drywall slurry
- Utility and mechanical room floors cleared
- Entry threshold, door glass and hardware
- Exterior stoop swept back to the walkway
Add anything from this list
Priced with your quote, not after.
- A third dust pass a week later
- Interior of the garage or shop
- Window track detail on new builds
- Steam extraction of new carpet
What this one does not cover
Said here rather than discovered on the day.
- Debris, offcut or packaging removal
- Paint touch-up, caulking or any repair
- Anything requiring a ladder over six feet
- Work on a site the trades have not finished
Maybe you want a different one
Deep clean
For the places a routine clean politely walks past.
See what it covers
Move-in / move-out clean
Written against the inspection, not against a general idea of clean.
See what it covers
One-time clean
The reset before the guests, or after them.
See what it covers
Steam carpet clean
Hot water extraction, and the drying time it honestly needs.
See what it covers
Wall stain removal
Scuffs, handprints and crayon off the wall, without the paint coming too.
See what it covers
